Projects

Our client has had issues with metal packing leaching from their concentrator reboiler. Local retrofitted the concentrator with ceramic structured packing to address the issue

Our client required multi-discipline engineering of a temporary piping and tankage setup to safely withdraw crude oil from an operating pipeline; the intent of the

Our client required electrical design for a pre-fabricated process / electrical building which included three 200HP air blowers including air-inlet pre-heaters and after coolers.  The

Local personnel have been involved in the design of several generations of pilot plants with the aim of dewatering oilsands tailings with a cost-effective process

Our client required replacement of three aging air compressors facing obsolescence which supplied instrument air to their plant.  Local was responsible to complete air flow

As part of a major capital project, our client needed to install a network of cable tray from the electrical room to the field equipment.

Our client required structural and electrical design for a pre-fabricated electrical building which included two 4500HP 7.2kV variable frequency drives used to power pumps at

Our client required electrical design for a pre-fabricated communication building which included a UPS system with a large battery bank, high-density fiber optic termination cabinets,

Our client utilizes various Hazardous Area Classification (HAC) drawings to guide the requirements and precautions that must be taken when performing Hot Work in these